Pratiques et Techniques en Plaisance | Imprimer | Fermer la fenêtre
Electricité : définitions et sécurité des personnes 7 octobre 2012 18:24, par NégofolAttention, le montage du dessin avec seulement phase et neutre est interdit par la norme ISO 13297 :
Défintion du conducteur de protection :
« conductor, not normally carrying current, used for some measure of protection against electric shock, for electrically connecting any of the following parts of electrical equipment to the craft’s ground (earth) and to the shore a.c. grounding conductor through the shore-power cable »
La norme US dit la même chose :
« Shore Power Cable – On each boat equipped with an AC shore power system, a shore power cable that contains the conductors for the power circuit and a grounding (green) conductor shall be provided. »
Un isolateur galvanique éventuel doit être placé comme le dit Robert :
"device installed in series with the a.c. protective conductor of the shore-power cable to block low-voltage d.c.
galvanic current flow, but permit the passage of alternating current normally associated with the protective
conductor"
La norme ne laisse pas le choix.... D’ailleurs pourquoi s’acharner à réinventer ce que décrit une norme bien faite et obligatoire, avec tous les risques potentiels que ça comporte ? Comme l’avait signalé Fred, en cas d’accident, la première chose que va vérifier l’expert est la conformité de l’installation.